Sanus VLT7-B2 Full Motion TV Wall Mount 42"-90" TVs

Product highlights

What's in the box

• Wall-plate 
• 2 TV brackets 
• Four M6x12mm screws 
• Four M6x20mm screws 
• Four M6x35mm screws 
• Four M8x16mm screws 
• Four M8x20mm screws 
• Four M8x30mm screws 
• Four M8x40mm screws 
• Four M8x50mm screws 
• Four M6/M8 washers 
• Four 2.5mm spacers 
• Four 5mm spacers 
• Four 22mm spacers 
• Four 5/16" x 2-3/4" lag-bolts 
• 4 Concrete anchors 
• Hex-key 
• Instruction Manual 
• Wall Plate Template 

Written by Crutchfield's Ralph Graves

The Sanus VLT7 wall mount uses a new design that makes it easy to tilt your mounted TV up, down, left, or right. You get a vertical tilt range of +7° to -13° and 15° side to side. Built-in extenders provide up to 6-13/16" clearance behind your TV, giving you room to tilt even a larger screen. This mount can also hold your TV as close as 2-1/8" to the wall.

The extenders also help with installation. Rather than having to remove your mounted TV to connect new gear, just tilt it up or to the side. There's plenty of room to reach back behind your set and connect those cables.

Once you've secured the open wall plate to the wall and attached the brackets to your TV, the whole assembly just slides into position. A safety lock closes with an audible click to let you know it's securely in place.

Post-installation adjustments help you get your screen positioned just right. The TV assembly can be shifted slightly left or right on the wall plate. So even if your wall studs are off-center, your TV doesn't have to be. And you can level your set after installation or make slight adjustments to screen height.

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Tell the  Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.